External drive not showing up: the usual causes
LostData lab team · · 2 min read
try another cable and another port, once. If it still doesn't show up, or you hear clicking or beeping, stop and bring it in with its case and cable.
What you can safely try
- Another cable. USB cables fail more often than you'd think.
- Another port, ideally one on the back of the computer, without a hub.
- Open Disk Management in Windows. If the drive shows with no letter, the fix may be simple. If it shows as RAW or with a strange size, don't click anything.
When to stop straight away
- Clicking, beeping or scraping sounds.
- The drive was dropped before it stopped showing up.
- No light or vibration at all, even with a different cable. In these cases every extra attempt can make the damage worse.
Why we need the case and cable
Some external drives, including many WD My Passport models, have an encryption chip on the USB board itself. The data on the drive is encrypted with that board's key, so if the case is thrown away or the board is swapped, getting the data back becomes much harder. Bring the drive complete, as it is.
What we do in the lab
We first find where the fault is: the board, the heads, the motor or the firmware. Then we send you a written price. Prices range from 350 to 4,500 SAR depending on the fault, and the diagnosis fee (100 SAR) only applies if you decline the quote.